The comprehensive manual, test result labels and sample forms mean that even someone new to safety testing can be using the BattPAT PAT Tester within half an hour of unpacking. This is because it simply shows PASS or FAIL when a test is done. The BattPAT is also safe for use on PCs and other IT equipment.
Class I metal test: When this button is pressed, the BattPAT will test Earth Continuity and Insulation Resistance showing the results for each test and an overall PASS or FAIL.
Class I plastic test: When this button is pressed, the BattPAT will test Insulation Resistance showing the results for the test and an overall PASS or FAIL.
Class II test: When this button is pressed, the BattPAT will carry out an Insulation Resistance test showing the results for the test and an overall PASS or FAIL.
Power cord test: When this button is pressed, the BattPAT will carry out an Earth Continuity, Insulation Resistance and a Polarity test showing the results for each test and an overall PASS or FAIL.
The BattPAT has a setting to test long extension leads up to 40 meters.
Battery charging: There are clear displays showing battery status and charging. A fast charge feature is available, allowing use of the BattPAT on battery power after just an hour. The BattPAT can be powered from the charger if the battery is flat.
More than 600 tests can be carried out by the BattPAT from a fully charged battery.